Content box_category
">
1"
:2,"
2"
:"
The GD750X-3S Greencut petrol earth drill or auger will allow you to effectively carry out all kinds of domestic tasks for the care of green areas that require the use of a drill.\nThe Greencut coring tool is equipped with a 75cc air-cooled OHV 2-stroke engine that produces 5.2 HP and a set of 3 helicoidal drill bits of 100mm, 150mm and 200mm diameter that offer fast, stable and versatile work.\nFeatures an Easy-start manual starter with a reversible handle that minimises the number of pulls and makes it easier to carry out all jobs.\n\nEngine: 2-stroke OHV\nCapacity: 75cc\nPower: 5.2 HP/10,000 rpm\nFuel type: 95 unleaded petrol\nFuel tank capacity: 1 litre\nEngine oil: 15-40W SF, SG, SH, SJ or higher\nStarting system: manual Easy-start with reversible handle\nDeclared noise level: 96 dB(A)\n\n\n1x GD750X-3S Auger\n1x 100mm diameter drill\n1x 150mm diameter drill\n1x 200mm diameter drill\n1x Basic maintenance and assembly tool kit\n1x Instruction manual \n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Earth auger GD750X-3S
">
1"
:2,"
2"
:"
The GD750X-3S Greencut petrol earth drill or auger will allow you to effectively carry out all kinds of domestic tasks for the care of green areas that require the use of a drill.\nThe Greencut coring tool is equipped with a 75cc air-cooled OHV 2-stroke engine that produces 5.2 HP and a set of 3 helicoidal drill bits of 100mm, 150mm and 200mm diameter that offer fast, stable and versatile work.\nFeatures an Easy-start manual starter with a reversible handle that minimises the number of pulls and makes it easier to carry out all jobs.\n\nEngine: 2-stroke OHV\nCapacity: 75cc\nPower: 5.2 HP/10,000 rpm\nFuel type: 95 unleaded petrol\nFuel tank capacity: 1 litre\nEngine oil: 15-40W SF, SG, SH, SJ or higher\nStarting system: manual Easy-start with reversible handle\nDeclared noise level: 96 dB(A)\n\n\n1x GD750X-3S Auger\n1x 100mm diameter drill\n1x 150mm diameter drill\n1x 200mm diameter drill\n1x Basic maintenance and assembly tool kit\n1x Instruction manual \n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x 100mm diameter drill
">
1"
:2,"
2"
:"
The GD750X-3S Greencut petrol earth drill or auger will allow you to effectively carry out all kinds of domestic tasks for the care of green areas that require the use of a drill.\nThe Greencut coring tool is equipped with a 75cc air-cooled OHV 2-stroke engine that produces 5.2 HP and a set of 3 helicoidal drill bits of 100mm, 150mm and 200mm diameter that offer fast, stable and versatile work.\nFeatures an Easy-start manual starter with a reversible handle that minimises the number of pulls and makes it easier to carry out all jobs.\n\nEngine: 2-stroke OHV\nCapacity: 75cc\nPower: 5.2 HP/10,000 rpm\nFuel type: 95 unleaded petrol\nFuel tank capacity: 1 litre\nEngine oil: 15-40W SF, SG, SH, SJ or higher\nStarting system: manual Easy-start with reversible handle\nDeclared noise level: 96 dB(A)\n\n\n1x GD750X-3S Auger\n1x 100mm diameter drill\n1x 150mm diameter drill\n1x 200mm diameter drill\n1x Basic maintenance and assembly tool kit\n1x Instruction manual \n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x 150mm diameter drill
">
1"
:2,"
2"
:"
The GD750X-3S Greencut petrol earth drill or auger will allow you to effectively carry out all kinds of domestic tasks for the care of green areas that require the use of a drill.\nThe Greencut coring tool is equipped with a 75cc air-cooled OHV 2-stroke engine that produces 5.2 HP and a set of 3 helicoidal drill bits of 100mm, 150mm and 200mm diameter that offer fast, stable and versatile work.\nFeatures an Easy-start manual starter with a reversible handle that minimises the number of pulls and makes it easier to carry out all jobs.\n\nEngine: 2-stroke OHV\nCapacity: 75cc\nPower: 5.2 HP/10,000 rpm\nFuel type: 95 unleaded petrol\nFuel tank capacity: 1 litre\nEngine oil: 15-40W SF, SG, SH, SJ or higher\nStarting system: manual Easy-start with reversible handle\nDeclared noise level: 96 dB(A)\n\n\n1x GD750X-3S Auger\n1x 100mm diameter drill\n1x 150mm diameter drill\n1x 200mm diameter drill\n1x Basic maintenance and assembly tool kit\n1x Instruction manual \n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x 200mm diameter drill
">
1"
:2,"
2"
:"
The GD750X-3S Greencut petrol earth drill or auger will allow you to effectively carry out all kinds of domestic tasks for the care of green areas that require the use of a drill.\nThe Greencut coring tool is equipped with a 75cc air-cooled OHV 2-stroke engine that produces 5.2 HP and a set of 3 helicoidal drill bits of 100mm, 150mm and 200mm diameter that offer fast, stable and versatile work.\nFeatures an Easy-start manual starter with a reversible handle that minimises the number of pulls and makes it easier to carry out all jobs.\n\nEngine: 2-stroke OHV\nCapacity: 75cc\nPower: 5.2 HP/10,000 rpm\nFuel type: 95 unleaded petrol\nFuel tank capacity: 1 litre\nEngine oil: 15-40W SF, SG, SH, SJ or higher\nStarting system: manual Easy-start with reversible handle\nDeclared noise level: 96 dB(A)\n\n\n1x GD750X-3S Auger\n1x 100mm diameter drill\n1x 150mm diameter drill\n1x 200mm diameter drill\n1x Basic maintenance and assembly tool kit\n1x Instruction manual \n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Basic maintenance and assembly tool kit
">
1"
:2,"
2"
:"
The GD750X-3S Greencut petrol earth drill or auger will allow you to effectively carry out all kinds of domestic tasks for the care of green areas that require the use of a drill.\nThe Greencut coring tool is equipped with a 75cc air-cooled OHV 2-stroke engine that produces 5.2 HP and a set of 3 helicoidal drill bits of 100mm, 150mm and 200mm diameter that offer fast, stable and versatile work.\nFeatures an Easy-start manual starter with a reversible handle that minimises the number of pulls and makes it easier to carry out all jobs.\n\nEngine: 2-stroke OHV\nCapacity: 75cc\nPower: 5.2 HP/10,000 rpm\nFuel type: 95 unleaded petrol\nFuel tank capacity: 1 litre\nEngine oil: 15-40W SF, SG, SH, SJ or higher\nStarting system: manual Easy-start with reversible handle\nDeclared noise level: 96 dB(A)\n\n\n1x GD750X-3S Auger\n1x 100mm diameter drill\n1x 150mm diameter drill\n1x 200mm diameter drill\n1x Basic maintenance and assembly tool kit\n1x Instruction manual \n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Instruction manual